SATEC SA300 ezPAC Operation Manual - Manual (Page 59)

Chapter 6 Using PAS Setting Up the Device
SA300 Substation Automation Unit 59
Copying Setups to the Device Database
To reuse setups from another site, you can simply copy them to your present site
database. Click Open, select the desired site database, and then click OK. The
opened setup is copied to your site database.
You can also copy all setups from one site database into another site's database.
Select a device site from the list box on the toolbar from which you want to reproduce
setups, and then select “Copy to...” from the Meter Setup menu. Select the site
database to which to copy setups, and then click OK.
Downloading Setup to the Device
PAS allows you to update each setup in your device one at time or to download all
setups together from the site database.
To update a particular setup in your device, check the On-line button
on the
PAS toolbar, select a device site from the list box, and then select the desired setup
group from the Meter Setup menu. Click on the tab of the setup you want to download
to the device, and then click Send.
To download all setups to your device at once, check the On-line button
on the
PAS toolbar, select the device site from the list box, and then select Download
Setups from the Meter Setup menu.
Uploading Setup from the Device
To upload the setup from the device to the site database, check the On-line button
on the PAS toolbar, select the device site from the list box, and then select
Upload Setups from the Meter Setup menu.