Rockwell Automation 1560E SMC Flex Smart Motor Controller - Manual (Page 12)

1-2 Product Overview
%
5-"
%.
0
Description (cont.) 1560E – Retrofit Controller
A medium voltage solid-state controller designed to work in conjunction
with an existing customer-supplied starter. It includes:
• Tin-plated, copper, horizontal power bus (optional)
• A continuous, bare copper ground bus
• Power electronics
• A bypass vacuum contactor
• Three (3) current transformers
• A low voltage control panel complete with microprocessor-based control module
• Top and bottom plates to accommodate power cables.
Note: See Interlocking, page 2-8.
1562E – Combination Controller
A medium voltage solid-state controller that provides isolation and
protection for new installations. It includes:
• Tin-plated, copper, horizontal power bus (optional)
• A continuous, bare copper ground bus
• Power electronics
• A main non-load-break isolating switch and operating handle
• An isolation vacuum contactor
• A bypass vacuum contactor
• Three (3) current limiting power fuses for NEMA Class E2 operation
• Three (3) current transformers
• A control power transformer (optional)
• A low voltage control panel complete with microprocessor-based control
module
• Space for necessary auxiliary control and metering devices
• Top and bottom plates to accommodate power cables
• Motor overload protection (included in SMC-Flex control module)
SMC-Flex™ Control Module
The MV SMC-Flex controller offers a full range of starting and stopping
modes as standard:
• Soft Start with Selectable Kickstart
• Soft Stop
• Current Limit Start with Selectable Kickstart
• Linear Acceleration with Selectable Kickstart
• Linear Deceleration
• Dual Ramp Start
• Preset Slow Speed
:
• Full Voltage Start
: This option utilizes gating patterns which result in motor and line currents that produce noise
and vibration in the motor and/or distribution transformer. This must be considered before
applying this option.