Rockwell Automation 1560E SMC Flex Smart Motor Controller - Manual (Page 50)

2-2 Installation 
%
5-"
%.
0
General Precautions In addition to the precautions listed throughout this manual, the following
statements, which are general to the system, must be read and understood.
The controller contains ESD (electrostatic discharge)
sensitive parts and assemblies. Static control
precautions are required when installing testing,
servicing, or repairing the assembly. Component
damage may result if ESD control procedures are not
followed. If you are not familiar with static control
procedures, refer to applicable ESD protection handbooks.
An incorrectly applied or installed controller can
damage components or reduce product life. Wiring or
application errors, such as undersizing the motor,
incorrect or inadequate AC supply, or excessive ambient
temperatures, may result in malfunction of the system.
Only personnel familiar with the controller and associated
machinery should plan or implement the installation,
start-up, and subsequent maintenance of the system.
Failure to do this may result in personal injury and/or
equipment damage.
Transportation and Handling The controller must be transported on a pallet or via use of the lifting
angles supplied as part of all 90-inch (2.3 m) high cabinets or frame units.
Ensure that the load rating of the lifting device is
sufficient to safely raise the controller sections. Failure
to do so may result in severe injury and/or equipment
damage. Refer to the packing slip enclosed with shipment
for shipping weights.
Round rollers can be used to assist in moving the controller to the instal-
lation site. Once at the final site, the pipe rolling technique can be used to
place the cabinet in the desired position.
Care must be exercised when using either a forklift, or
the pipe rolling technique, for positioning purposes to
ensure that the equipment is not scratched, dented or
damaged in any manner. Always exercise care to
stabilize the controller during handling to guard against
tipping and injury to personnel.
A T T E N T I O N A T T E N T I O N
A T T E N T I O N A T T E N T I O N
A T T E N T I O N A T T E N T I O N
A T T E N T I O N A T T E N T I O N
A T T E N T I O N A T T E N T I O N