Rockwell Automation 1560E SMC Flex Smart Motor Controller - Manual (Page 87)

Programming 4-7
1560E-UM050B-EN-P - June 2013
Using Parameter Management
Description Action Display
Saving to EEPROM
To ensure that the newly modified
parameters are not lost if control
power is removed from the
controller, store the values into
EEPROM.
Recalling from EEPROM
Parameters stored in EEPROM can
be manually brought to RAM by
directing the controller to recall the
values in its EEPROM.
Recalling Defaults
After parameter values have been
modified and saved to EEPROM,
factory default settings can still be
re-initialized.