Rockwell Automation 1560E SMC Flex Smart Motor Controller - Manual (Page 164)

10-6 Maintenance
1560E-UM050B-EN-P - June 2013
• Chromate Plating
Some sheet steel and fasteners are plated with zinc and sealed with a
chromate-based dip (gold-coloured finish). Shipping and handling of
chromate plated parts is not restricted under any regulations,
however, chromate is considered a hazardous substance. Chromate
plated parts must be disposed of according to local regulations and
must not be disposed of with general landfill refuse.
• In Case Of Fire
This product is highly protected against arcing faults and therefore it
is very unlikely it would be the cause of a fire. In addition, the
materials used are self-extinguishing (i.e. they will not burn without
a sustained external flame). If, however, the product is subjected to
a sustained fire from some other source, some of the polymer materials
will produce toxic gases. As with any fire, individuals involved in
extinguishing the fire or anyone in close proximity should wear a
self-contained breathing apparatus to protect against any inhalation
of toxic gases.
Disposal
When disposing of the product, it should be disassembled and separated
into groups of recyclable material as much as possible (i.e. steel, copper,
plastic, wire, etc.). These materials should then be sent to local recycling
facilities. In addition, all disposal precautions mentioned above must
also be taken for those particular materials.
Environmental Considerations
(cont.)