Rockwell Automation 1560E SMC Flex Smart Motor Controller User Manual
Page 193
Spare Parts
D-7
1560E-UM050B-EN-P - June 2013
Table D.7
Bulletin 1503E, 1560E, 1562E • 5500/6900 Volt, 600 Amp, 18-device
Ë
Qty per controller
Description
Part Number
3
Heatsink Assembly 600A with Thermistor
80187-285-51-R
Note : Due to stringent torquing specifications in this application, it is MANDATORY that the entire heatsink assembly
be replaced. Contact the Rockwell Automation factory.
Ì
80165-898-52-R
9
SCR Gate Driver Board
(2 devices)
Í
80165-898-55-R
3
IGDPS Board Í
80026-044-03-R
1
Voltage Sensing Module
81000-199-55-R
1
MV SMC Interface Circuit Board
80190-440-01-R
18
Snubber Resistor
80025-642-04-R
9
Snubber Capacitor 1.0 µF
80025-812-01-R
9
Sharing Resistor 32.5K, 225W
80025-753-01-R
2.5 m
80025-549-03-R
21
Fiber-optic Cable
5.0 m
80025-549-01-R
2
Bridge Rectifier Î
24808-451-01-R
120 V
80145-581-02-R
2
MOV Î
230 V
80145-581-07
120V AC (North America)
80187-051-51-R
1
Test Power Supply
Universal
80187-245-51-R
6
Voltage Divider Resistors, 74K 100W
80025-588-05-R
110/120 V AC
80154-991-59-R
1
Contactor Relay Control
Panel Î
220/230 V AC
80187-226-54
3
Power Fuses u
Consult Engineering Data
2
CPT Primary Fuses u
Consult Engineering Data
1
LV Fuses
Consult Engineering Data
3
Heater Elements u
Consult Engineering Data
2
20 Amp Contact Cartridge for Isolation Switch Auxiliary u
700-CPM
600 A
80157-709-51-R
3
Isolating Switch Blade Assembly
1-pole (moving blade assembly)
800 A
Consult the Rockwell
Automation factory
600 A
80157-710-51-R
3
Isolating Switch Blade Assembly
1-pole (fixed blade assembly)
800 A
Consult the Rockwell
Automation factory
Special Lubricant (for Blade Assembly)
80158-357-51-R
u
1562E only.
Ë
Reference only. 1503E – For OEM products, refer to OEM-supplied documentation for specific spare parts list.
1560/1562E are Allen-Bradley manufactured starters. Refer to Service Manual for specific spare parts list.
Ì
Used when options 13XG (Stop Control) or 13XB (Pump Control) are not provided.
Í
Used when options 13XG (Stop Control) or 13XB (Pump Control) are provided.
Î
Not provided if IntelliVAC control is used (refer to Publication 1503-UM051B-EN-P for spare part information on IntelliVAC).