Rockwell Automation 1560E SMC Flex Smart Motor Controller - Manual (Page 85)

Programming 4-5
1560E-UM050B-EN-P - June 2013
Password
The SMC-Flex Controller allows the user to limit access to the
programming system through password protection. This feature is disabled
with a factory-set default of 0. To modify the password or login after a
password is programmed, complete the procedure below.
Description Action Display
– –
1. Press the ESC key to go from the
status display to the Main menu.
Esc Esc
2. Scroll with the Up/Down keys until
the Preferences option is
highlighted.
3. Press the Enter key to access the
Preferences menu.
4. Scroll with the Up/Down keys
until the Change Password
option is highlighted.
5. Press the Enter key.
6. Press the Up/Down keys to enter
the desired number. If you are
modifying the password, make a
note of it as displayed.
7. Verification of the new password
is required. Press the Enter key.
8. Press the Enter key after you
have completed modifying the
password. u v
u After you have changed your password, go to Parameter Management and Save to User Store.
v To complete the programming process, re-enter the Main Menu mode to log out.
This will eliminate unauthorized process to the programming system.
Note: If you lose or forget the password, contact your nearest Rockwell
Automation sales office. You can also call Rockwell Automation
Medium Voltage Product Support at 1-519-740-4790 for assistance.