Rockwell Automation 1785-LTx,D17856.2.1 Classic PLC-5 Programmable Controllers Users Manual - Manual (Page 175)

Design Worksheets
Appendix B
B-25
Select Programming Terminal Configuration
1. Make a copy of this worksheet for each of your programming terminals.
2. Document your software configuration decisions below for your Classic PLC-5 processor
__________ located in chassis number _____________.
DH+ connections:
Local access or remote network access ________________________________
Direct or multi-drop ________________________________
Type of interface card ________________________________
Unique station address assigned to terminal ________________________________
Bit address of KT board in programming terminal
________________________________