Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 106)

Publication 1747-UM655B-EN-P - June 2007
106 AutoScan
4. On the DEM instruction setup screen to initiate AutoScan, fill in
the fields as follows.
5. On the Send Data tab, enter a 1 to enable AutoScan.
6. Fill in the DEM instruction Setup dialog to disable AutoScan.
TIP
Make sure to match the 1747-SDN Slot and DeviceNet Address
to your particular scanner module. All other fields should
appear exactly as shown above.