Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 85)

Publication 1747-UM655B-EN-P - June 2007
Creating and Running the Example Application Program 85
5. Double-click the O0 - OUTPUT file under the Data Files folder.
You see the 1747-SDN module’s command register (file O:2.0
below).
6. Set bit 0 in the command register to 1, as shown above.
7. Press and release the START button on the RediSTATION
operator interface.
The red light should turn on. On your screen, you see rung 1 in
your ladder program being energized as you press the button.
8. Pass your hand back and forth over the photoeye several times.
On your screen you should see the counter increment.
9. Press and release the STOP button on the RediSTATION
operator interface.
The red light should turn off. On your screen, you see rung 2 in
your ladder program being energized as you press the button.
This completes the Ethernet example.