Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 39)

Publication 1747-UM655B-EN-P - June 2007
Hardware Setup 39
Install the 1747-KFC15 Module in the Chassis
1. Remove power from your 1746 I/O chassis.
2. Install the 1747-KFC15 module into an empty I/O slot.
The 1747-KFC15 module must be placed near enough to the SLC
processor to connect the supplied RS-232 cable between them.
We used slot 1 for the example application.
3. Connect the 1747-KFC15 module to your SLC 500 processor with
the RS-232 cable.
Connecting the 1747-KFC15 Module to the ControlNet Network
Connect the 1747-KFC15 to the ControlNet cable system by using an
approved ControlNet tap.
ATTENTION
Electrostatic discharge can damage semiconductor devices
inside the 1747-KFC15 module. To guard against electrostatic
damage, wear an approved wrist strap grounding device, or
touch a grounded object to rid yourself of electrostatic charge
before handling the products.
RS-232 Cable