Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 25)

Publication 1747-UM655B-EN-P - June 2007
Planning Your Configuration and Data Mapping Your Devices 25
Example Network Devices
This example network has the following devices:
•
A computer running RSNetWorx for DeviceNet software
•
A 1747-SDN communication module interfacing an SLC 500
processor with the DeviceNet network
•
A Series 9000 photoelectric sensor (strobed)
•
A RediSTATION operator interface (polled)
The system you set up is shown below.
Example Network
IMPORTANT
In the following example, output is data sent to a device from a
controller. Input is data collected from a device by a controller.
Computer running Windows 2000 or
later operating system, containing
RSNetWorx for DeviceNet software.
Node 62
1770-KFD
Communication
Module
Series 9000
Photoelectric Sensor
Node 9
DeviceNet Network
Node 0 Node 7
1747-SDN and SLC 500 Processor in
SLC 1746 Chassis
RediSTATION Operator Interface
IMPORTANT
Each end of the DeviceNet trunk cable must be properly
terminated with a resistor. Refer to the DeviceNet Media
Design Installation Guide, publication DNET-UM072, for
detailed information.