Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 57)

Publication 1747-UM655B-EN-P - June 2007
Configuring the DeviceNet Network 57
7. Click the double arrow to add the photoeye and
RediSTATION operator interface to the Scanlist.
Verify the Photoeye Configuration
1. Double-click the photoeye in the Scanlist.
The Edit I/O Parameters dialog appears for the photoeye.
The I/O parameters define the configuration for the device in
terms of how much and what data the device exchanges with
the 1747-SDN module. By default, the photoeye will send 1 byte
when it receives the strobe request.
2. Verify that the photoeye parameters are set as shown above.
3. Click OK to close the photoeye Edit I/O Parameters dialog.
Verify the RediSTATION Configuration
1. Double-click the RediSTATION operator interface in the Scanlist
dialog.