Configure the ethernet devices driver – Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual User Manual
Page 66
Advertising
![background image](/manuals/579400/66/background.png)
Publication 1747-UM655B-EN-P - June 2007
66 Communicating with the DeviceNet Network from Another Network
Configure the Ethernet Devices Driver
To communicate with your SLC 500 processor over the Ethernet
network you must configure the Ethernet to SLC 500 driver. Follow
these steps to configure the driver by using RSLinx software.
1. Start RSLinx software.
2. From the Communication menu, choose Configure Drivers.
The Configure Drivers dialog appears.
3. From the Available Driver Types pull-down menu, select
Ethernet to PLC-5/SLC-5/5820-E and click Add New.
Advertising