Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 70)

Publication 1747-UM655B-EN-P - June 2007
70 Communicating with the DeviceNet Network from Another Network
8. Click OK.
You are prompted to enter a name for the driver.
9. Enter an appropriate driver name (for example, 1747-SDNPT-2)
and click OK.
The new driver is added to the list of Configured Drivers in
RSLinx software. (Your list contains the drivers you have
configured for your system.)
10. Close or minimize RSLinx software.
Communicate with the DeviceNet Network
You can use RSNetWorx for DeviceNet software to communicate with
the DeviceNet network via the Ethernet network once the Ethernet
pass-through driver is configured.
Follow these steps to communicate with the DeviceNet network.