Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual - Manual (Page 54)

Publication 1747-UM655B-EN-P - June 2007
54 Configuring the DeviceNet Network
3. Select the 1770-KFD driver.
The devices on the network appear in the right panel of the
dialog.
4. Select the device you are commissioning in the right panel and
click OK.
The Node Commissioning dialog appears with the current
settings for your 1747-SDN module. Your dialog should look
similar to the one shown below.
5. Enter a 0 in the New Device Settings: Node Address box.
6. Click Apply and exit the dialog.