Install the 1747-sdn module in the chassis – Rockwell Automation 1747-SDN SLC 500 DeviceNet Scanner Module User Manual User Manual
Page 41
Advertising
Publication 1747-UM655B-EN-P - June 2007
Hardware Setup 41
Install the 1747-SDN Module In the Chassis
Follow these steps to install your module into the chassis.
1. Turn off the chassis power supply.
2. Select a slot for the module in the chassis.
You may use any slot except the leftmost slot, which is reserved
for the SLC 500 processor.
3. Insert the module into the slot you have selected by applying
firm, even pressure to seat the module in the chassis backplane
connectors.
ATTENTION
Do not install the 1747-SDN module with the chassis power
supply on. Installing the module with the chassis power supply
on may damage the module.
Advertising