Rockwell Automation 1771-N SERIES High Resolution Analog Module User Manual - Manual (Page 7)

Using this Manual P–3
Publication 1771ĆUM127B-EN-P - December 2002
You can place your analog module in any I/O module slot of the
I/O chassis.
Do not put the analog module in the same module group as a digital
high density module unless you are using 1 or 1/2-slot addressing.
Avoid placing the analog module close to ac modules or high voltage
dc modules.
For a list of publications with information on Allen-Bradley
programmable controller products, consult our publication index
SD499.
Related Publications