Rockwell Automation 1734-ACNR POINT I/O ControlNet Adapter User Manual - Manual (Page 32)

Publication 1734-UM008B-EN-P - August 2005
4-2 Configure the Adapter
The 1784-PCC module is the Personal Computer ControlNet
network interface card used to talk to the networks.
2. Start RSLogix5000 Enterprise series software, version 15 or
greater.
3. From the File menu, choose New.
You see this dialog.
4. Complete the following entries.
• Type
• Name
• Description (optional)
• Chassis Type
• Slot
• Create In
5. Verify that the revision of the controller is compatible with the
POINT I/O products.
The controller’s revision should be 15 or higher.
6. Click OK to close the dialog.
You see this dialog.