Rockwell Automation 1734-ACNR POINT I/O ControlNet Adapter User Manual User Manual
Page 35
Advertising
Publication 1734-UM008B-EN-P - August 2005
Configure the Adapter 4-5
5. Click OK to see the New Module dialog.
6. Complete the following entries.
• Name
• Node
• Description (optional)
• Slot
• Open Module Properties
7. Click the Open Module Properties box to see the Module
Properties dialog when you click OK.
8. Click OK.
Notice that the ControlNet_Bridge is under the I/O Configuration.
Advertising