Rockwell Automation 1734-ACNR POINT I/O ControlNet Adapter User Manual - Manual (Page 92)

Publication 1734-UM008B-EN-P - August 2005
A-30 1734-POINT I/O Module/RSLogix5000 Controller Tag Reference
To enter values from +128 to +255, use these conversion formulas:
Decimal Position Note:
Desired Decimal Position Value - 256 = Entered Decimal
Position Value.
Example: For a divisor of 200, 200 - 256 = -56
Gate Interval Note:
Desired Gate Interval Value - 256 = Entered Gate Interval Value.
Example: For a Gate Interval of 200, 200 - 256 = -56
Scalar Note:
Desired Scalar Value - 256 = Entered Scalar Value.
Example: For a Scalar of 128, 128 - 256 = -128
1734-IJ
1 Channel 5V DC Encoder / Counter
1734-IK
1 Channel 15-24V DC Encoder / Counter
Configuration Data Data Type Default
Value Valid Data Values
SS Counter Control
SS Counter Reset
SS Counter Preset
SS Value Reset
SINT
BIT 0
BIT 1
BIT 2
0
0=Count Unchanged
1=Count Cleared
0=Count Unchanged
1=Count Set to Preset
0=Count Unchanged
1=Count Cleared