Rockwell Automation 1734-ACNR POINT I/O ControlNet Adapter User Manual - Manual (Page 41)

Publication 1734-UM008B-EN-P - August 2005
Configure the Adapter 4-11
• Listen-Only - Rack Optimization
8. Click OK.
Notice that 1734-OB2E is now under the I/O configuration.
9. Click 1734-OB2E to see the New Module dialog.
10. Complete entries for the following.
IMPORTANT
Use Rack Optimization and Listen-Only Rack
Optimization connections only for discrete I/O
modules. Analog and speciality modules require
direct connection.
For a complete listing of connection types, see:
Publication 1734-UM001, POINT I/O Digital and
Analog Modules and POINTBus I/O Modules