Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 135)

Publication 2711P-UM001J-EN-P - November 2009 135
Windows CE .NET Operating System Chapter 5
System
The System dialog provides system, device, and copyright information
for the PanelView Plus CE terminals. It also provides memory
allocations for storage and programs. If you make memory
adjustments, remember to click OK to activate settings.
General
The General tab displays system operating and computer information.
Memory
The Memory tab displays the amount of memory allocated and in use
for storage and programs. These settings are controlled by the system
at startup and can be adjusted by an application program. Normally, it
is not necessary to the change the setting unless a program reports a
need for more memory. Move the slider to the left to increase the
allocation for program memory. The memory allocations are
automatically adjusted as you move the slider.