Disconnect the touch screen connector, Remove the sealing gasket – Rockwell Automation 2711P PanelView Plus Terminal User Manual User Manual
Page 156
Advertising
156
Publication 2711P-UM001J-EN-P - November 2009
Chapter 6 Install and Replace Components
3. On touch-screen only terminals, remove the two screws that
secure the small metal plate to the back of the display module.
4. Disconnect the touch screen connector.
5. Remove the screws from the back of the display module.
The number of screws varies for each terminal type.
6. Remove the sealing gasket.
Plate
Touch Screen Connector
Display Module Bezel
Advertising