Push down on the logic module until firmly seated – Rockwell Automation 2711P PanelView Plus Terminal User Manual User Manual
Page 145
Advertising
Publication 2711P-UM001J-EN-P - November 2009
145
Install and Replace Components Chapter 6
4. Push down on the logic module until firmly seated.
5. Tighten the six captive screws that secure the logic module to
the display module to a torque of 0.58 Nm
(
5…7 lb•in).
Captive
Screw
Logic Module
Captive screws
on top and bottom.
Advertising