Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 74)

74 Publication 2711P-UM001J-EN-P - November 2009
Chapter 4 Configuration Mode
Field Description Valid Values
Use DHCP Enables or disables Dynamic Host
Configuration Protocol (DHCP) settings. DHCP
automatically allocates network devices and
configurations to newly attached devices on
the network.
If DHCP is set to Yes, the terminal is
automatically assigned an IP address, Subnet
Mask, and Gateway. The fields are disabled.
If DHCP is set to No, you can enter the IP
address, Subnet Mask, and Gateway
address.
Yes (default)
No
IP Address A unique address identifying the terminal on
the Ethernet network. xxx.xxx.xxx.xxx
000.000.000.000 (default)
Range of values for the first
set of decimal numbers is
1…255 unless all fields are
set to 000. The range of values
for the last three sets of
decimal numbers is 0…255.
Subnet Mask Address must be identical to the server
subnet mask. xxx.xxx.xxx.xxx
Gateway Optional Gateway address. xxx.xxx.xxx.xxx
Mac ID Read-only field.