B. insert the new backlight – Rockwell Automation 2711P PanelView Plus Terminal User Manual User Manual
Page 160
Advertising
160
Publication 2711P-UM001J-EN-P - November 2009
Chapter 6 Install and Replace Components
7. Follow these steps for the PanelView Plus 700 and 1000
displays.
a. Press the retaining tab that secures the backlight and then pull
out the backlight.
b. Insert the new backlight.
8. Follow these steps for the PanelView Plus 1250 and 1500
displays.
a. Remove the screws that secure the backlights and remove the
backlights.
– The two backlights for the 1250 series A and B displays are
each secured with two screws. The single backlight for the
1250 series C displays is secured with one screw.
Backlight
Retaining Tab
Backlight
Advertising