Rockwell Automation 2711P PanelView Plus Terminal User Manual User Manual
Page 201
Advertising
Publication 2711P-UM001J-EN-P - November 2009
201
Upgrade Firmware Chapter 8
8. From the Firmware source folder text box, select the location of
the firmware files.
The default location is C:\Program Files\Rockwell
Software\FactoryTalk View Enterprise\FUPs.
9. From the Upgrade firmware version list, select the version of the
firmware you want to upgrade to, then click Next.
10. Select the appropriate KEPServer drivers and click Next.
If no KEPServer drivers are needed, just click Next.
TIP
If the selected FUP file does not support the KEPServer
drivers, this dialog box will not appear.
PanelView Plus 700
Advertising