Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 142)

142 Publication 2711P-UM001J-EN-P - November 2009
Chapter 6 Install and Replace Components
Component Compatibility
for PanelView Plus CE
Terminals It is important to match the series of the internal CompactFlash card
with the correct series of the logic module and software version. The
series of the CompactFlash determines the version of FactoryTalk
View ME software and version of the operating system. The logic
module is available with or without memory installed.
Component Compatibility
for PanelView Plus
Terminals It is important that you match the series of the internal CompactFlash
card with the correct series of the logic module and software revision.
The series of the CompactFlash determines the version of FactoryTalk
View ME software. The logic module is available with or without
memory installed.
Logic Module
6189-RPx, 6189-RPRHx,
6189-RPEHx,
2711P-RPx, 2711P-RPx,
2711P-RP6x, 2711P-RP7x Internal CompactFlash
6189-RW2, -RW3, -RW4
2711P-RW6, -RW7, -RW8 FactoryTalk View ME & OS
Software Version
Series A: 6189-RPxH/A
(1) Series B: 6189-RWx/B FactoryTalk View ME 3.0
Windows CE 3.0
Series B: 6189-RPxH/B Series C: 6189-RWx/C FactoryTalk View ME 3.10
Windows CE 4.1
Series B: 6189-RPxH/B
Series C: 6189-RPxH/C
Series D: 6189-RPxH/D
Series E: 6189-RPxHx/E
Series F: 2711P-RPxx/F
(2)
Series G: 2711P-RPxxx/G
(2)
Series H: 2711P-RPxxx/H
(2)
Series D: 6189-RWx/D
Series E: 6189-RWx/E FactoryTalk View ME 3.20
Windows CE 4.1
Series F: 6189-RWx/F
Series G: 6189-RWx/G
Series H: 2711P-RWx/H FactoryTalk View ME 4.0
Windows CE 4.1
Series J: 2711P-RWx/J FactoryTalk View ME 5.0 or 5.1
Windows CE 4.1
(1) When upgrading from FactoryTalk View ME software, version 3.0 to 3.10 or later, the Firmware Upgrade Kit is recommended.
(2) Series F and later logic modules work with PanelView Plus and PanelView Plus CE CompactFlash cards.
Logic Module
2711P-RPx, 2711P-RP1x,
2711P-RP2x, 2711P-RP3x Internal
CompactFlash
2711P-RW1, -RW2,
-RW3 FactoryTalk View ME
Software Version
Series A: 2711P-RPx/A
(1)
(1) Series A logic modules are compatible with series B Compact Flash cards. When upgrading from FactoryTalk View ME
software, version 3.0 to 3.10 or later, the Firmware Upgrade Kit is required.
Series B: 2711P-RWx/B FactoryTalk View ME 3.0
Series B: 2711P-RPx/B Series C: 2711P-RWx/C FactoryTalk View ME 3.10
Series B: 2711P-RPx/B
Series C: 2711P-RPx/C
Series D: 2711P-RPx/D
Series E: 2711P-RPxx/E
Series F: 2711P-RPxx/F
(2)
Series G: 2711P-RPxxx/G
(2)
Series H: 2711P-RPxxx/H
(2)
(2) Series F and later logic modules work with PanelView Plus and PanelView Plus CE CompactFlash cards.
Series D: 2711P-RWx/D
Series E: 2711P-RWx/E FactoryTalk View ME 3.20
Series F: 2711P-RWx/F
Series G: 2711P-RWx/G
Series H: 2711P-RWx/H FactoryTalk View ME 4.0
Series J: 2711P-RWx/J FactoryTalk View ME 5.0
or 5.1