Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 61)

61 Publication 2711P-UM001J-EN-P - November 2009 61
Chapter
4
Configuration Mode
Chapter Objectives This chapter shows how to use the Configuration mode of your
PanelView Plus terminal to:
•
perform data entry and navigation.
•
load an application.
•
run an application.
•
modify application settings.
•
modify terminal settings.
•
configure startup shortcuts for PanelView Plus CE devices.
Access Configuration Mode Your PanelView Plus device has onboard software, FactoryTalk View
ME Station, to perform and configure terminal operations. When you
reset or start the terminal, you automatically enter Configuration
mode, unless your .MER application is automatically set to run on
startup.
To access Configuration mode from a running application, press the
Goto Configuration Mode button. This button is added to the
application screen in FactoryTalk View Studio. The application stops
running but is still loaded.
On PanelView Plus CE devices, you can enter Configuration mode
from the Start menu or the desktop.
•
Select Start>Programs>Rockwell Software>FactoryTalk
View>FactoryTalkView ME Station.
•
Select the FactoryTalk View ME Station icon on the desktop.
IMPORTANT
To access Configuration mode from a running application, you
must add a Goto Configuration Mode button to an application
screen.