Remote log destination, Message routing – Rockwell Automation 2711P PanelView Plus Terminal User Manual User Manual
Page 77
Publication 2711P-UM001J-EN-P - November 2009
77
Configuration Mode Chapter 4
Remote Log Destination
The Remote Log Destination forwards messages that it receives to a
Windows 2000/XP computer running diagnostics. The location is
determined by the IP address and port number.
Message Routing
The Message Routing screen lets you access these screens:
•
Remote Log
•
FactoryTalk View Diagnostics List
Each of the above screens shows a list of messages that can be sent to
that destination. The list shows the On/Off status of each message
type. Use the On/Off button to turn a message type on or off. A
message type is enabled if it has a checked box.
Field
Description
Valid Values
Address
Address of the remote Windows
2000/XP computer.
xxx.xxx.xxx.xxx
Port
The port used to communicate with the
remote Windows 2000/XP computer.
4445 (default)