Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 18)

18 Publication 2711P-UM001J-EN-P - November 2009
Chapter 1 Overview
Modular Components
The terminals use modular components allowing for flexible
configuration, installation, and upgrades. You can order items as
separate components or factory assembled per your configuration.
Base-configured Unit
The base-configured unit of the terminal consists of:
•
display module (700, 1000, 1250, 1500) with keypad, touch, or
keypad and touch input.
•
logic module.
The logic module contains:
•
24V DC input (18…32V) or AC input (85…264V).
•
SDRAM and flash memory, various sizes.
•
10/100 BaseT Ethernet port.
•
serial RS-232 port for file transfers, printing, and logic controller
communications.
•
two USB ports for attaching mouse, keyboard, or printer.
•
card slot for Type I CompactFlash cards.
•
battery-backed real-time clock.
Display Module
Logic Module
Communication Module
Power Input,
AC or DC
Ethernet Port
Serial Port
CompactFlash Card Slot
USB Ports
Logic Module
Display Module