Panelview plus 700 to 1500 terminals, Remove power from the terminal, Remove the display module bezel – Rockwell Automation 2711P PanelView Plus Terminal User Manual User Manual
Page 163: Replace the display module bezel
Advertising
Publication 2711P-UM001J-EN-P - November 2009
163
Install and Replace Components Chapter 6
PanelView Plus 700 to 1500 Terminals
The F1-Fxx and K1-Kxx legend inserts on the PanelView Plus 700 to
1500 terminals are accessible when the display module bezel is
removed.
1. Remove power from the terminal.
2. Remove the display module bezel.
3. Pull the legend inserts out from the slots on the bezel.
4. Slide the new legend strips into the same slots until only the end
tab is visible.
5. Replace the display module bezel.
600 Terminal
Advertising