Logic controller cable charts, Runtime communication cables - to controller – Rockwell Automation 2711P PanelView Plus Terminal User Manual User Manual
Page 166
166
Publication 2711P-UM001J-EN-P - November 2009
Chapter 7 Terminal Connections
Logic Controller Cable
Charts
The charts provide a summary of terminal connections to controllers
and network interface modules.
Runtime Communication Cables - To Controller
PanelView Plus and PanelView Plus CE Terminals to SLC Controllers
Cables: PanelView Plus and PanelView Plus CE to SLC Controllers
Protocol
PanelView Plus Comm Port
SLC-500, 5/01, 5/02
CH1 RJ45
(DH-485)
SLC-5/03, 5/04, 5/05
CH0 (9-pin RS-232)
(DF1 or DH-485)
SLC 5/03
CH1 (RJ45)
(DH-485)
SLC 5/04
CH1 (DH+)
SLC 5/05
CH1 (ENET)
DF1
(any)
RS-232 (DF1) Port (9-pin)
PanelView Plus 400 to 1500
2711P-RN22C
N/A
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2706-NC13 (3 m/10 ft)
N/A
N/A
N/A
DH-485
(any)
RS-232 (DH-485) Port (9-pin)
PanelView Plus 400 to 1500
2711P-RN22C
Use AIC+ Module
(1761-NET-AIC)
Connect to Port 1 or 2
2711-NC13 (5 m/16 ft)
2711-NC14 (10 m/32 ft)
2706-NC13 (3 m/10 ft)
Use AIC+ Module
(1761-NET-AIC)
Connect to Port 1 or 2
N/A
N/A
DH-485 Port
PanelView Plus 400 and 600
2711P-RN3
(2)
1747-C10 (2 m/6 ft)
1747-C11 (0.3 m/1 ft)
1747-C20 (6 m/20 ft)
Use AIC+ Module
(1761-NET-AIC)
Connect to Port 3
1747-C10 (2 m/6 ft)
1747-C11 (0.3 m/1 ft)
1747-C20 (6 m/20 ft)
N/A
N/A
DH-485 Port
PanelView Plus 700 to 1500
2711P-RN6, -RN6K
1761-CBL-AS03
(3 m/10 ft)
1761-CBL-AS09
(9 m/30 ft)
Use AIC+ Module
(1761-NET-AIC)
Connect to Port 3
1761-CBL-AS03
(3 m/10 ft)
1761-CBL-AS09
(9 m/30 ft)
N/A
N/A
ControlNet
ControlNet Port
PanelView Plus 400 and 600
2711P-RN15C
PanelView Plus 700 to 1500
2711P-RN15S, -RN15SK
N/A
1747-KFC15A or
1747-SCRNR/A Module with ControlNet Cable
DeviceNet
(1)
DeviceNet Port
PanelView Plus 400 and 600
2711P-RN10C
PanelView Plus 700 to 1500
2711P-RN10H
N/A
Use 1747-SDN Module
with DeviceNet Cable
EtherNet/IP
EtherNet/IP Port
PanelView Plus 400 to 1500
All except 2711P-xxx5xx
N/A
Use 1761-NET-ENI Module
with Ethernet Cable
N/A
N/A
1585J-M Type
Cable or
2711P-
CBL-EX04
(4 m/14 ft)
(3)
Remote I/O
Remote I/O Port
PanelView Plus 400 to 1500
2711P-RN1, 2711P-RN6
SLC 5/02 only
Use 1747-SN with
Shielded Twinaxial Cable
(1770-CD)
Use 1747-SN Module with Shielded Twinaxial Cable (1770-CD)
DH+
DH+ Port
PanelView Plus 400 and 600
2711P-RN8
PanelView Plus 700 to 1500
2711P-RN6, -RN6K
N/A
N/A
N/A
Shielded
Twinaxial
Cable
(1770-CD)
N/A
(1)
DeviceNet and Remote I/O communication modules are no longer available. Cable information is provided for reference only.
(2)
For CE compliance, use the 1761-NET-AIC or 1747-AIC module for cable lengths longer than 30 m (98 ft).
(3)
EtherNet/IP direct connection from the terminal to an SLC 5/05 controller requires an Ethernet switch or the 2711P-CBL-EX04 crossover cable.