Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 164)

164 Publication 2711P-UM001J-EN-P - November 2009
Chapter 6 Install and Replace Components
Use an External
CompactFlash Card All of the terminals have a CompactFlash card slot that supports
Type 1 CompactFlash cards that come in different memory sizes.
The orientation of the card slot on the 700 to 1500 terminals varies
depending on the series of the logic module.
Insert a CompactFlash Card
Insert the card in the CompactFlash card slot until firmly seated.
Remove a CompactFlash Card
Press the Eject button on the logic module. When the button pops
out, press it again to release the card. The location of the button varies
depending on the series of the logic module.
The PanelView Plus 400 and 600 terminals do not have an eject
button. Secure edge of card with fingers and pull card away from slot.
CompactFlash Card Slot
400 and 600 Terminals 700 to 1500 Terminals