Metrohm 915 KF Ti-Touch - Manual (Page 145)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
13 GLP manager
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 131
Input range 0.00000 - 100.00000 %
Default value empty %
a sys
Systematic error.
Input range 0.00000 - 9999999999.00000
Default value empty
13.5 System monitoring
13.5.1 Service interval
Main dialog: System ▶ GLP manager ▶ Monitoring ▶ Service inter-
val
In the dialog GLP manager / Service interval, you can define the time
interval for the maintenance of the system by the Metrohm Service
department. The service interval is checked each time the system is
started.
Last service
Date on which the last servicing was carried out.
Format: YYYY:MM:DD
Monitoring
on | off (Default value: off)
If this parameter is activated, then the time interval after which system
maintenance must be carried out again will be monitored.
Service interval
If you define a time interval for the system maintenance, then the date in
Next service will be tracked automatically.
Input range 1 - 999 days
Default value 999 days
Next service
If you specify a date for the next system maintenance, then the Service
interval will be tracked automatically.
Format: YYYY:MM:DD