Metrohm 915 KF Ti-Touch - Manual (Page 253)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
27 Manual control
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 239
￭ Type 8XX without integrated data chip:
If an exchange unit without integrated data chip is attached, then the
titrant can be selected from the titrant list. We recommend always
selecting the titrant. This ensures that the parameters defined for the
titrant for the preparing are used. Titrants are defined under Sys-
tem
▶ Titrants.
[Empty]
Empty the cylinder and the tubings of the dosing unit (see Chapter 27.3.4,
page 245).
[Prepare]
Rinse the cylinder and the tubings of the exchange / dosing unit (see
Chapter 27.3.3, page 244).
[Fill]
Fill the cylinder of the exchange / dosing unit (see Chapter 27.3.5, page
245).
[Dosing fixed vol.]
Dose a specified volume (see Chapter 27.3.2, page 241).
[Dosing]
Dose continuously (see Chapter 27.3.1, page 239).
27.3.1 Continuous dosing
Manual control: Dosing ▶ Dosing