Metrohm 915 KF Ti-Touch - Manual (Page 248)

27.1 Opening and closing the manual control
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
234 ￭￭￭￭￭￭￭￭
915 KF Ti-Touch
27.1 Opening and closing the manual control
Opening the manual control
1 Open the dialog window
￭ Tap on the fixed key [ ].
Manual control opens:
2 Select the function
￭ Tap on the button for the desired function.
If the function can be carried out by several devices, a dialog to
select the device will appear first; otherwise the dialog for the
selected function will appear immediately.
Closing the manual control
1
￭ Tap on the fixed key [ ].
NOTE
Manual control can also be exited when a manual sequence has been
started but has not yet ended. The fact that a sequence has been
started in manual control can be recognized by the corresponding sym-
bol in the title line (see Chapter 6.2.3, page 27).