Metrohm 915 KF Ti-Touch - Manual (Page 50)

7.2 System-specific dialog options
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
36 ￭￭￭￭￭￭￭￭
915 KF Ti-Touch
NOTE
The configuration of the routine dialog applies for all routine users. You
also have the option of defining user-specific routine settings. To do
this, you must work with the login function activated and create an
identification profile for each user (see Chapter 7.3.2, page 40).
Proceed as follows to modify the configuration for the routine dialog:
1 Open the dialog
Tap on the button [Routine dialog].
The list of all buttons in the main dialog, in the manual control, etc. is
displayed:
2 Deactivate buttons
Deactivate those buttons which are not permitted to be used.
All deactivated buttons will appear grayed-out, i.e. they are inactive.
3 Deactivate other functions
Many additional buttons and parameters can be disabled in the dia-
logs of [System], [Load method], [Control], [Edit parameters]
and [Results]. The corresponding option must be activated in order
to enable these buttons.
4 Save the settings
Tap on the fixed keys [ ] or [ ].