Metrohm 915 KF Ti-Touch - Manual (Page 153)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
15 Templates
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 139
15 Templates
Main dialog: System ▶ Templates
You have the option of defining system-specific templates. You can
use these templates when editing the respective data.
You can create the following templates:
￭ Sample data (see Chapter 15.1, page 139)
Create sample identifications and sample assignments.
￭ Custom result templates (see Chapter 15.2, page 143)
Define formulas for result calculations.
￭ Input lines (see Chapter 15.3, page 147)
Define input signals on the remote interface.
￭ Output lines (see Chapter 15.4, page 149)
Define output signals on the remote interface.
￭ Report header (see Chapter 15.5, page 152)
Create a system-specific report header that contains information con-
cerning the laboratory, for example.
15.1 Sample data
Main dialog: System ▶ Templates ▶ Sample data
You can create the following templates in the dialog Templates / Sam-
ple data:
￭ Sample identifications(see Chapter 15.1.1, page 140)
List with sample identifications. If you must enter the sample identifica-
tion before starting a determination, then you can select the entries
contained in this list.