Metrohm 915 KF Ti-Touch - Manual (Page 198)

20.2 Edit the sample data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
184 ￭￭￭￭￭￭￭￭
915 KF Ti-Touch
Loading a sample table
Proceed as follows to load a sample table:
1 Display the list of saved sample tables
￭ In the dialog Sample table, tap on the button [Load/ Save].
The dialog Sample table / Load/Save is displayed.
If no external storage medium is plugged in or if no file system is
shared, then [Load] is disabled.
￭ Tap on [Load].
The selection of memory locations is displayed. This selection will
be skipped if only one memory can be accessed.
￭ Select the memory location where the desired sample table is
stored.
The selection of file groups is displayed (see Chapter 12.1, page
113). If only one group is available, then the list of the saved sam-
ple tables will be displayed directly.
￭ Select the group with the desired sample table.
￭ Tap on [Show files].
The list with the saved sample table is opened.
2 Select the sample table
￭ Select the desired sample table.
3 Load the sample table
￭ Tap on [Load].
The sample table is now loaded.
20.2 Edit the sample data