Metrohm 915 KF Ti-Touch - Manual (Page 27)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 13
Figure 5 MSB connector
CAUTION
Switch off the Ti-Touch before you plug in MSB devices. When it is
switched on, the Ti-Touch automatically recognizes which device is con-
nected to which MSB connector. The connected MSB devices are
entered automatically in the device manager.
MSB connections can be extended with the 6.2151.010 cable. The maxi-
mum connection length permitted is 6 m.
4.3.1 Connecting dosing devices
You can connect two dosing devices to the Ti-Touch.
The types of dosing devices that are supported are:
￭ 800 Dosino
￭ 805 Dosimat
Proceed as follows:
1 Switch off the Ti-Touch.
2 Connect the dosing device connection cable to an MSB connector
(2-5) on the rear side of the Ti-Touch.
3 Switch on the Ti-Touch.