Metrohm 915 KF Ti-Touch - Manual (Page 167)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
15 Templates
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 153
2 Copying the file to an external storage medium
￭ Copy the file "CustomImage.jpg" to the directory "915".
If this structure is not maintained, the file will not be found
because the software directly accesses the "915" directory.
￭ Plug in the external storage medium at the Ti-Touch.
3 Loading the graphics file
￭ In the Templates / Report header dialog, tap on the [Load]
button.
The file is copied to the internal memory.
￭ Switch the instrument off and back on again.
4 Applying the custom logo
￭ In the Templates / Report header dialog, activate the Print
logo option.
￭ Define Logo = Custom logo.
Your logo will now be printed in the report header of all reports in
the future.