Metrohm 915 KF Ti-Touch User Manual
Page 256
Advertising
27.3 Dosing
■■■■■■■■■■■■■■■■■■■■■■
242
■■■■■■■■
915 KF Ti-Touch
You can dose a particular volume with the [Dosing fixed vol.] function.
Proceed as follows:
1 Configure the dosing function
NOTE
■
The dosing and filling rates should be decreased for viscous liq-
uids.
■
The maximum dosing and filling rates depend on the cylinder
volume (see Chapter 31, page 338).
■
Enter the desired volume.
■
Enter the dosing rate.
■
Enter the filling rate.
2 Start dosing
■
Tap on [Start].
The volume display is shown. When the volume of one cylinder has
been dosed, the dosing cylinder will be refilled automatically.
Advertising