Dell PowerVault MD3000 - Manual (Page 117)

Script Commands
117
Check Disk Consistency
This command checks a virtual disk for consistency and media errors, and
writes the results of the check to a file.
Syntax
check virtualDisk [ virtualDiskName ] consistency
[consistencyErrorFile= filename ] [mediaErrorFile=
filename ] [priority=(highest | high | medium | low
| lowest)] [verbose=(TRUE|FALSE)]
Parameters
Parameter Description
virtualDisk Name of the specific virtual disk to check
consistency. You must put brackets ([ ])
around the virtual disk name. If the
virtual disk name has special characters,
you must also put quotation marks (" ")
around the virtual disk name.
consistencyErrorFile Name of the file in which to save the
consistency error information. You must
put quotation marks (" ") around the file
name.
mediaErrorFile Name of the file in which to save the
media error information. You must put
quotation marks (" ") around the file
name.
priority Specifies the priority that the consistency
check has relative to host I/O activity.
Valid entries are highest, high, medium,
low, or lowest.
verbose Captures progress details, such as percent
complete, and shows the information
while virtual disk consistency is being
repaired. To capture progress details, set
this parameter to TRUE. To prevent
capturing progress details, set this
parameter to FALSE.