Dell PowerVault MD3000 - Manual (Page 187)

Script Commands
187
Parameter
NOTE:
The iSNS protocol facilitates the automated discovery, management, and
configuration of iSCSI and Fibre Channel devices on a TCP/IP network. The iSNS
protocol provides intelligent storage discovery and management services
comparable to those found in Fibre Channel networks, allowing a commodity IP
network to function in a similar capacity as a storage area network. The iSNS
protocol also facilitates a seamless integration of IP and Fibre Channel networks,
due to its ability to emulate Fibre Channel fabric services, and manage both iSCSI
and Fibre Channel devices.
Set Storage Array iSNS Server Listening Port
This command sets the iSNS server listening port.
Syntax
set storageArray isnsListeningPort = integer
Parameter
NOTE:
A listening port resides on the database server and is responsible for
listening (monitoring) for incoming client connection requests and managing the
traffic to the server
NOTE:
When a client requests a network session with a server, a listener receives
the actual request. If the client information matches the listener information, then
the listener grants a connection to the database server.
Example
-c "set storageArray isnsListeningPort = 3205;"
Parameter Description
isnsIPV6Address IPv6address you want to use for the iSNS
server
Parameter Description
isnsListeningPort The IP address that you want to use for
the iSNS server listening port. The range
of values for the listening port is 49152 to
65535. The default value is 3205.