Dell PowerVault MD3000 - Manual (Page 219)

Script Commands
219
Parameter
Stop Physical Disk Blink
This command turns off the indicator LED on the physical disk that were
turned on by the start physicalDisk blink command.
Syntax
stop physicalDisk blink
Parameters
None.
Stop Snapshot
This command stops a copy-on-write operation.
Syntax
stop snapshot (virtualDisk [ virtualDiskName ] |
virtualDisks [ virtualDiskName1 ...
virtualDiskNamen ]
Parameters
Parameter Description
integer The identifier number of the iSCSI session. Enclose the identifier
number of the iSCSI session in square brackets ([ ]).
Parameter Description
virtualDisk or virtualDisks Name of the specific virtual disk for which to stop a copy-
on-write operation. You can enter more than one virtual
disk name. You must put brackets ([ ]) around the virtual
disk names. If the virtual disk names have special
characters, you must also put quotation marks (" ")
around the virtual disk names.