Dell PowerVault MD3000 - Manual (Page 185)

Script Commands
185
Parameter
NOTE:
The Internet Control Message Protocol (ICMP) is used by operating systems
in a network to send error messages, such as a requested service is not available
or that a host or router could not be reached. The ICMP response command sends
ICMP Echo Request messages and receives Echo Response messages to
determine if a host is reachable and how long packets take to get to and from that
host.
Example
-c "set storageArray icmpPingResponse = TRUE;"
Set Storage Array iSNS Server IPv4 Address
This command sets the configuration method and address for an IPv4
Internet Storage Name Service (iSNS).
Syntax
set storageArray isnsIPV4ConfigurationMethod =
[static | dhcp] isnsIPV4Address = ipv4-address
Parameter Description
icmpPingResponse This parameter turns on or turns off Echo Request messages.
Set the parameter to TRUE to turn on Echo Request
messages. Set the parameter to FALSE to turn off Echo
Request messages.