Dell PowerVault MD3000 - Manual (Page 206)

206
Script Commands
Show Storage Array Host Topology
This command returns storage partition topology, host type labels, and host
type index for the host storage array.
Syntax
show storageArray hostTopology
Parameters
None.
Show Storage Array LUN Mappings
This command returns information from the storage array profile about the
storage array LUN mappings. If you run this command with no parameters,
this command returns all LUN mappings.
Syntax
show storageArray lunMappings [host [" hostName "] |
hostgroup [" hostGroupName "]]
Parameters
Show Storage Array Negotiation Defaults
This statement returns information about connection-level settings that are
subject to initiator-target negotiation.
Parameter Description
host Name of a specific host for which to see the LUN mappings.
You must put quotation marks (" ") and brackets ([ ]) around
the host name. The host name and quotation marks must be
inside the brackets.
hostGroup Name of a specific host group for which to see the LUN
mappings. You must put quotation marks (" ") and brackets
([ ]) around the host group name.The host group name and
quotation marks must be inside the brackets.