Dell PowerVault MD3000 - Manual (Page 118)

118
Script Commands
Clear Physical Disk Channel Statistics
This command resets the statistics for all physical disk channels.
Syntax
clear allPhysicalDiskChannels stats
Parameters
None.
Clear Storage Array Configuration
This command clears the entire configuration from the RAID controller
modules in a storage array. Information that defines all disk groups, virtual
disks, and hot spares is deleted. Use this command to create a new
configuration on a storage array that already has a configuration defined.
NOTICE:
As soon as you run this command, the existing storage array
configuration is deleted. You must restart all attached hosts prior to reconfiguring
the storage array.
Syntax
clear storageArray configuration
Parameters
None.
Clear Storage Array Event Log
This command clears the Major Event Log (MEL) for the storage array by
deleting the data in the MEL buffer.
NOTICE:
As soon as you run this command, the existing MEL in the storage array is
deleted.
Syntax
clear storageArray eventLog
Parameters
None.